I agree... this is the guy to buy gaskets from if you have an alloy
cover.
Here's his website... you can order directly...
http://www.roadstergaskets.com/TR234.html
I think for the stock covers, my gaskets have him beat, but his flat
gaskets are the bee's knees for alloys.
--Justin
Chuck Arnold and/or Kathleen Kelley wrote:
>I use these for the 6 cylinder with non-stock valve cover:
>
>Had very good luck with one a guy sells on ebay all the time.
>Glue it to the cover so if you have to have head work done you do not
>lose it [ask me how I know].
>http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220296018075&ss
>PageName=STRK:MEWAX:IT
>
>vendor name is roadstergaskets
>
>Chuck
>
>On Sat, Jan 16, 2010 at 9:40 AM, Tony Drews <tony@tonydrews.com> wrote:
>
>
>>This is probably a good place to start:
>>http://jmwagnersales.com/
>>
>>Works with the stock valve cover, not the aluminum one as I recall. The
>>folks who have them seem to love them. You really need to have the engine
>>cool to install the valve cover with this gasket in place - the heat
>>
>>
>expands
>
>
>>the gasket and makes things difficult for installation. So, if you're
>>frequently pulling the valve cover between sessions at the track it's a bit
>>of a challenge. Otherwise, it's a nice solution.
>>
>>- Tony Drews
>>
>>At 10:20 AM 1/16/2010, Mark Pendergrass wrote:
>>
>>
>>>Guess i'm outta the loop here, how do i/we get more info. on this product,
>>>Mark P.
>>>----- Original Message ----- From: "marty sukey" <trmarty@hotmail.com>
>>>To: "Scott Janzen" <s.janzen@comcast.net>; "FOT" <fot@autox.team.net>
>>>Sent: Saturday, January 16, 2010 7:13 AM
>>>Subject: Re: [Fot] silicone Valve Cover Gaskets
>>>
>>>
>>>
>>>
>>>>I have one of Justin Wagner's gaskets on my engine and would definitely
>>>>do it
>>>>again. Good stuff.
>>>>
>>>>Marty
>>>>
>>>>
>>>>
>>>>>From: s.janzen@comcast.net
>>>>>To: fot@autox.team.net
>>>>>Date: Fri, 15 Jan 2010 15:20:51 -0500
>>>>>Subject: [Fot] silicone Valve Cover Gaskets
>>>>>
>>>>>has anyone had good or bad experiences with these? Thinking about
>>>>>replacing the leaky cork one on my GT6 - it does have an alloy cover.
>>>>>
>>>>>I'm guessing this has been discussed before - is there a way to search
>>>>>the archives by subject?
>>>>>
>>>>>
>>_______________________________________________
>>
>>Support Team.Net http://www.team.net/donate.html
>>
>>Suggested annual donation $12.96
>>
>>You are subscribed as triosan@gmail.com
>>
>>http://www.fot-racing.com
>>
>>
>>Fot@autox.team.net
>>http://autox.team.net/mailman/listinfo/fot
>>
>>Brought to you by Team.Net consulting - Unix software specialist.
>>
>>
>>
>>
>
>
>
>--
>Chuck Arnold and Kathleen Kelley
>_______________________________________________
>
>Support Team.Net http://www.team.net/donate.html
>
>Suggested annual donation $12.96
>
>You are subscribed as jmwagner@greenheart.com
>
>http://www.fot-racing.com
>
>
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>
>Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|