I think you may find the inside edge of the spring pan resting against the
spring tower. If that is the case, TR6 spring pans cure the problem since they
are a different shape at the back edge.
Bob
---- davehogye <dlhogye@comcast.net> wrote:
> Hello all,
> I've noticed after installing TR4A upper control arms and ball joints on my
>TR3, that the suspension no longer rests on the bumpers below the spring pan.
>The ball joints do not allow full extension. I purchased the ball joints from
>The Roadster Factory. I'm wondering if another suppliers ball joints might
>allow more movement. It sure doesn't seem good to me that the suspension at
>full extension should rest against the ball joint. I guess that a taller
>bumper could be used. Any tips or info on this matter would be appreciated.
> Thanks,
> Dave H.
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rdavis4@cfl.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|