Did you also change the TR3 trunnions to those of the TR4 ( 3degrees of caster)?
Dennis
Hello all,
I've noticed after installing TR4A upper control arms and ball joints on my
TR3, that the suspension no longer rests on the bumpers below the spring pan.
The ball joints do not allow full extension. I purchased the ball joints from
The Roadster Factory. I'm wondering if another suppliers ball joints might
allow more movement. It sure doesn't seem good to me that the suspension at
full extension should rest against the ball joint. I guess that a taller bumper
could be used. Any tips or info on this matter would be appreciated.
Thanks,
Dave H.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/yellow-green@sbcglobal.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|