Been there done that on my tr6.
All my head gasket issues went away when I started using Payen gaskets.
Mike
Sent from my iPhone
On Jul 13, 2010, at 9:35 AM, "William Collins" <bkolnz@sbcglobal.net> wrote:
> I have been having head gasket issues for awhile now and finally went with
a
> solid copper gasket from Gasket works that actually was designed to lower
> compression a bit. It leaked oil at ECR, so the head is off again and I'm
> looking for a gasket dressing/seal that will get this done for the rest of
the
> year. Can't get a response from Gasket works, and Moss recommends
Hylomar.
> Suggestions?
> Bill Collins
> Euless, TX
> '72 spit /1296 sj
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|