fot
[Top] [All Lists]

Re: [Fot] Trackwidth of Spitfire 1500

To: Spridgets@autox.team.net
Subject: Re: [Fot] Trackwidth of Spitfire 1500
From: claus@triumphracing.net
Date: Thu, 26 Aug 2010 22:38:27 +0200
I was under the impression that the track was always measured with a
neutral camber, but I've just checked the FIA appendix K and couldn't find
that mentioned, so maybe I dreamt it up. Would have solved your racer's
problem, though.

Regards,
Claus



Hi guys,

Question:
I have to look after the rules of our group and announced that we will
measure track width at the next event.

I got the question of a Spiti racer how he should stay under the max track
width.

Our rules says that the max track width of that car (Spitfire 1500) is:

Front: 1296 mm = 51.02"
Rear: 1321.6 mm = 52.03"

He says, if he does use the wishbone spacers at front to achieve negative
camber he gets over the max track width.
For the rear he claims that his leaf sping is weak, so he has lots of
negative camber and the he is over the track width at rear also.

I'm not so familiar with that car but maybe you can help me with your
experience how difficult it would be to stay under the max track width
values.

Does his trouble do come from the wheel rims? Too wide or too much offset?
Or is this a common problem with that car?

Cheers
Chris
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/claus@triumphracing.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>