Now is the time to get it straight and true, and beef up the most
stressed sections a little bit before popping the frame onto it.
~Steve
On Sep 21, 2010, at 5:34 PM, davehogye wrote:
Hello all,
Does anyone know the tolerable limits to frame measurements for TRs.
I'm about to put my TR3 body back on the frame and things are reading
a little out. I have a 3/8" difference from front axles to back, and
on the short side, the right, it's about 3/8" up on the front corner.
The car did have a couple badly bent wheels on it when I bought it,
but it had no evidence of being in any nasty fender benders and all of
the body panels were original. It doesn't seem like a real problem to
me, but now would be the time to tweek it a bit and I do have access
to a frame machine.
I'd appreciate any comments,
Dave H.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/colordog.1@earthlink.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|