Also, we can use shims between the rear axle and the spring as Kas
described for the original cars.
- Tony
At 06:19 PM 9/27/2010, Joe Boruch wrote:
>Dave, You could put shims between the front spring pan and the lower A-arms to
>lower the front corner of the diagonal that is too heavy. You can also move
>weight around in the car. For example. place the battery closer to the light
>rear corner. Joe(B)
>
>---------- Original Message ----------
>From: SpiwakD@aol.com
>To: fot@autox.team.net
>Subject: [Fot] Corner weights
>Date: Sun, 26 Sep 2010 20:35:47 EDT
>
>How can we adjust corner weights without having coil springs?
>_______________________________________________
>fot@autox.team.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|