fot
[Top] [All Lists]

Re: [Fot] TR3 and Southwick Conversion

To: friends of triumph <fot@autox.team.net>
Subject: Re: [Fot] TR3 and Southwick Conversion
From: Steven Belfer <colordog.1@earthlink.net>
Date: Tue, 1 Feb 2011 09:23:35 -0800
I have the Southwick conversion on my TR3 with the stock-length axle  
tubes.  There plates were ground down a bit to fit over the flange.   
It gets thin in places.  Also, the guy who performed the conversion  
used U-bolts of different diameters so that the outer's are thinner to  
make a better fit over the flange.

~Steve
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>