There are a couple of ways to fix this. You can have an oversized guide
installed or if the guide is soft enough you can have it knurled and then
reinstalled. Loctite sleeve retainer would be a good idea to help keep it in
place. Joe(B)
---------- Original Message ----------
From: Scott Janzen <sjanzen@me.com>
To: 'Friends of Triumph' Triumph <fot@autox.team.net>
Subject: [Fot] Moving Valve Guide - how to fix?
Date: Fri, 04 Feb 2011 10:49:14 -0500
Doing some winter maintenance, I noticed that one of the intake valve
guides has shifted down into the port about 1/4". What's the
appropriate fix for this, assuming the guide is a standard diameter?
Reassemble with red loctite, JB weld, or ?
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jaboruch@netzero.net
____________________________________________________________
$65/Hr Job - 25 Openings
Part-Time job ($20-$65/hr). Requirements: Home Internet Access
http://thirdpartyoffers.netzero.net/TGL3231/4d4cb47bc71fa1e1eb5st01duc
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|