I was thinking about doing this when that last set of shoes wouldn't
fit. Glad to hear it works in a pinch.
On 7/2/2011 9:45 PM, Catpusher@aol.com wrote:
> If you can not fit the shoes into the drum, and can not get a shop to arc
> them, file the metal ends of the shoes that fit into the adjuster and
> cylinder ends till the drums will fit with the required click or two of free
> play. This is an emergency patch that I have used a number of times. Check
> after the first session to see if the shoes have reasonable contact with the
> drum.
> Is anything bent or not aligned?
>
> TR Regards,
> Hardy
>
>
> Date: Fri, 01 Jul 2011 19:25:10 -0700
> From: "william r tobin"<william.tobin31@verizon.net>
> To:<fot@autox.team.net>
> Subject: [Fot] I'm back
> <snip>
> Any time I've put on linings, it's been a fight. They always seem too big
> for
> the drums, which also seem oversized. Supposed to be 9" but mic out .060 or
> more over. I'm using Kevlar rear shoes and I'm not sold on them. I'm also
> using finned alloy rear drums. Do they still arc-grind drum brake linings
> to
> fit the drums?
> <snip>.
> Thanks, Bill Tobin D.A.L. Racing
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
>http://autox.team.net/mailman/options/fot/norlinengineering@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|