fot
[Top] [All Lists]

Re: [Fot] Steering shaft u-joint TR-4

To: "'Bill Babcock'" <ponobill@gmail.com>, <malaboge@aol.com>
Subject: Re: [Fot] Steering shaft u-joint TR-4
From: "Jim Gray" <toodamnfunky@comcast.net>
Date: Mon, 15 Oct 2012 22:40:48 -0600
Cc: fot@autox.team.net
Delivered-to: fot-archive@autox.team.net
Delivered-to: fot@autox.team.net
Thread-index: Ac2rU4SqATdYkJt3QVmh/TJasecclQABMByw
That MGB U-joint looks pretty nifty but looks heavy. Are they available in
titanium ?
jg

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Bill Babcock
Sent: Monday, October 15, 2012 10:05 PM
To: malaboge@aol.com
Cc: fot@autox.team.net
Subject: Re: [Fot] Steering shaft u-joint TR-4

Seiously guys, the TR6 joints are crap too. I used them on my street TR3
rack
and pinion conversion, but they're not much compared to the modern stuff.
It's
not a competitive advantage, just pure safety. SAE considers 5/8" shafts to
be
marginal and 3/4" to be appropriate. For the same price of the original
stuff
you can get 3/4" double d with hefty universals that have needle bearings
twice the size of the TR6 stuff. Your choice, your butt.

On Oct 15, 2012, at 5:48 PM, malaboge@aol.com wrote:

> Here's another vote for the TR6 joints...all metal and a direct bolt in.
The
> units with the "rag joint" are only outdone on the the "crummy scale" by
the
> units with eight conical "faucet washers" holding it all together.  I do a
lot
> of tech for the local clubs and can't even count all of the bad, torn or
> extremely loose joints I've found.  Some were so bad the cars weren't
allowed
> on the track until the joints were fixed.
>
> All cars that come thru the shop with any of the rag/taper washer setups
> automatically get the solid joints installed...now that's really a "safety
> upgrade" ...unlike the song and dances I've heard for brakes, engines,
> trannies...oh wait that's a different rant!
>
> Still tryin to keep it vintage...
> Nick in Norcal
>
>
> -----Original Message-----
> From: Tony Drews <tony@tonydrews.com>
> To: fot <fot@autox.team.net>
> Sent: Sun, Oct 14, 2012 6:53 pm
> Subject: [Fot] Steering shaft u-joint TR-4
>
>
> My steering shaft has two u-joints in it.  The lower one is a big
> beefy cast thing that I bought from Moss to replace the big beefy
> cast thing that was there before.  The upper one isn't quite as heavy
> duty looking but does a much better job of actually clamping onto the
> shaft.  I've tightened the sh** out of the lower big beefy one and
> it's still not as tightly clamped as I'd like.
>
> So...  Where can I buy alternate u-joints for the TR-4 steering shaft?
>
> Look forward to the advice.
>
> Tony Drews
>
> PS - article on front suspension swap to TR-6 stuff is still coming.
> _______________________________________________
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net



<Prev in Thread] Current Thread [Next in Thread>