fot
[Top] [All Lists]

Re: [Fot] front toe setting for racing TR6

To: "'Tony Drews'" <tony@tonydrews.com>, "'Chuck Arnold and/or Kathleen Kelley'" <triosan@gmail.com>, "'Friends'" <fot@autox.team.net>
Subject: Re: [Fot] front toe setting for racing TR6
From: "geoff byrne" <gkbyrne@optushome.com.au>
Date: Thu, 22 Nov 2012 21:49:51 +1100
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <CAMc4sNDH29Hja5D+YFJAXX94r+ie8VsF7h0H9PM9P4vW3P6pMA@mail.gmail.com> <20121120152818.3F7DD438F6@autox.team.net>
Thread-index: AQHWsA1dHYUg/X6vlR/I7Cr/6YDgJAGrLtMhl9aERYA=
I run 2mm toe out to give better turn in
Geoff Byrne 
TR6 Racer down under

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Tony Drews
Sent: Wednesday, 21 November 2012 2:29 AM
To: Chuck Arnold and/or Kathleen Kelley; Friends
Subject: Re: [Fot] front toe setting for racing TR6

1/16" toe in is a good place to start.

Tony Drews

At 11:22 PM 11/17/2012, Chuck Arnold and/or Kathleen Kelley wrote:
>What is the recommended front toe setting.  I am running stiff [600 lb 
>] front springs.
>Thanks
>--
>Chuck Arnold and Kathleen Kelley
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/fot/gkbyrne@optushome.com.au
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>