Depends on a lot of things, width of front track,width of tire wheel combo,
offset of wheel. With slicks I run1/16th total toe-in with the narrower tire
wheel combo that I ran at the Mitty, I found that 0 toe handled better.
Mike
________________________________
From: Chuck Arnold and/or Kathleen Kelley
<triosan@gmail.com>
To: Tony Drews <tony@tonydrews.com>; Friends
<fot@autox.team.net>
Sent: Tuesday, November 20, 2012 1:00 PM
Subject: Re:
[Fot] front toe setting for racing TR6
Thanks Tony.
Is that each side is in
a 1/16, or each a 32nd? Will use the "strings"
method so I know what each
side is doing. Also, car now pulls to te left.
Steeing wheel is removable so
can be set to any position to center. Should
I hold the wheel straight as I
come to a stop and then set each side from
that point, or should I move the
wheel so that the left side is at 1/16th
in, then adjust the right, then
reposition the wheel?
On Tue, Nov 20, 2012 at 7:28 AM, Tony Drews
<tony@tonydrews.com> wrote:
> 1/16" toe in is a good place to start.
>
> Tony
Drews
>
> At 11:22 PM 11/17/2012, Chuck Arnold and/or Kathleen Kelley wrote:
>
>> What is the recommended front toe setting. I am running stiff [600 lb ]
>>
front springs.
>> Thanks
>> --
>> Chuck Arnold and Kathleen Kelley
>>
______________________________**_________________
>> fot@autox.team.net
>>
>>
http://www.fot-racing.com
>>
>> Donate:
>> Archive:
>> Forums: http://www.team.net/forums
>>
Unsubscribe: http://autox.team.net/mailman/**
>>
options/fot/tony@tonydrews.com<http://autox.team.net/mailman/options/fot/tony
@tonydrews.com>
>>
>
>
>
--
Chuck Arnold and Kathleen Kelley
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive:
Unsubscribe:
http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|