fot
[Top] [All Lists]

[Fot] TR6 hot start problems A.R.E HEATSHIELDS

To: TR3driver@ca.rr.com, fot@autox.team.net
Subject: [Fot] TR6 hot start problems A.R.E HEATSHIELDS
From: N197TR4@cs.com
Date: Sun, 6 Jan 2013 12:42:06 -0500 (EST)
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
Full-name: N197TR4
Joe's heat shield did wonders for my TR3, but I guess you knew that.  I also
recently learned to hold the throttle about 1/3 down while starting (with no
choke obviously), which seems to help some, too.

----------------------------------------------------------------------------
-------------------------------------------

My contention is that street TRIUMPHS need heatshields more than race cars 
because of heat buildup and quality of gas.

Jack & I made up aluminum heatshields for our race cars.  Then I 
reprocessed then into a design in a superior stainless steel material and on 
production equipment, with the help of Jack and Irv Korey....and Sean 
Alexander.  
They are well distributed by TRF, Moss, Victoria British, and we do an 
exclusive one for GoodParts.

Still there is no guarantee that this will cure the problem of hard starts 
if there are other issues.  But cool fuel is always a good idea, eh?   

> 
> 
> 

</HTML>
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>
  • [Fot] TR6 hot start problems A.R.E HEATSHIELDS, N197TR4 <=