I've just taken over the phrase.
I'm talking about a valve which use the exhaust system to vent the
crankcase.
No idea if it is called PVC or PCV?
Cheers
Chris
-----Urspr|ngliche Nachricht-----
Von: Christopher Bock [mailto:SeaCubeCo@aol.com]
Gesendet: Freitag, 1. Februar 2013 13:27
An: MadMarx
Cc: <fot@autox.team.net>
Betreff: Re: [Fot] Crankcase Venting - testing
Are we talking about PVC or PCV?
Chris
On Feb 1, 2013, at 2:31 AM, "MadMarx" <tr4racing@googlemail.com> wrote:
> How to test a PVC valve?
>
> After I had these several failures I've checked the valve before each run:
>
> - I pull the hose from the valve cover
> - blow by mouth into the hose (to operate the valve)
> - and suck back
>
> On sucking the valve has to block, totally block the sucking back. If
> there is gentle blow by the valve is gone.
>
> My HD valve construction can be easy made by people who has a lathe.
> The dimensions aren't important.
> You can take the normal PVC valve as pattern.
>
> The spring is the important part. I used a snippet of a SU carb spring
> for valve operating.
>
> Installed:
> https://lh4.googleusercontent.com/-tEf8uoPfIBo/UJJmlQug4SI/AAAAAAAABhI
> /GcSEH
> 3d4wnU/s983/20121101_130726.jpg
>
>
>
> Cheers
> Chris
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/seacubeco@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|