Regardless of the name, it does work.
Ive measured the pressure value with a gauge that read positive and
negative values.
I see very often negative values and very tiny positive values.
Cheers
Chris
Von: EDWARD BARNARD [mailto:edwardbarnard@prodigy.net]
Gesendet: Freitag, 1. Februar 2013 14:49
An: MadMarx; Christopher Bock
Cc: <fot@autox.team.net>
Betreff: Re: [Fot] Crankcase Venting - testing
Chris: I do believe you mean:
PCV: Positive Crankcase Ventilation
SeaCubeCo@aol.com> wrote:
Subject: Re: [Fot] Crankcase Venting - testing
Date: Friday, February 1, 2013, 7:17 AM
Just joking.
PVC. Poly vinyl chloride. White plastic tubing
PCV. Particle control valve.
Just having fun with.
It is a great read
Chris
On Feb 1, 2013, at 7:30 AM, "MadMarx" <tr4racing@googlemail.com
<http://us.mc1844.mail.yahoo.com/mc/compose?to=tr4racing@googlemail.com> >
wrote:
> I've just taken over the phrase.
>
> I'm talking about a valve which use the exhaust system to vent the
> crankcase.
>
> No idea if it is called PVC or PCV?
>
> Cheers
> Chris
>
> -----UrsprC<ngliche Nachricht-----
> Von: Christopher Bock [mailto:SeaCubeCo@aol.com
<http://us.mc1844.mail.yahoo.com/mc/compose?to=SeaCubeCo@aol.com> ]
> Gesendet: Freitag, 1. Februar 2013 13:27
> An: MadMarx
> Cc: <fot@autox.team.net
<http://us.mc1844.mail.yahoo.com/mc/compose?to=fot@autox.team.net> >
> Betreff: Re: [Fot] Crankcase Venting - testing
>
> Are we talking about PVC or PCV?
>
> Chris
>
> On Feb 1, 2013, at 2:31 AM, "MadMarx" <tr4racing@googlemail.com
<http://us.mc1844.mail.yahoo.com/mc/compose?to=tr4racing@googlemail.com> >
wrote:
>
>> How to test a PVC valve?
>>
>> After I had these several failures I've checked the valve before each
run:
>>
>> - I pull the hose from the valve cover
>> - blow by mouth into the hose (to operate the valve)
>> - and suck back
>>
>> On sucking the valve has to block, totally block the sucking back. If
>> there is gentle blow by the valve is gone.
>>
>> My HD valve construction can be easy made by people who has a lathe.
>> The dimensions aren't important.
>> You can take the normal PVC valve as pattern.
>>
>> The spring is the important part. I used a snippet of a SU carb spring
>> for valve operating.
>>
>> Installed:
>> https://lh4.googleusercontent.com/-tEf8uoPfIBo/UJJmlQug4SI/AAAAAAAABhI
>> /GcSEH
>> 3d4wnU/s983/20121101_130726.jpg
>>
>>
>>
>> Cheers
>> Chris
>> _______________________________________________
>> fot@autox.team.net
<http://us.mc1844.mail.yahoo.com/mc/compose?to=fot@autox.team.net>
>>
>> http://www.fot-racing.com <http://www.fot-racing.com/>
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/seacubeco@aol.com
_______________________________________________
fot@autox.team.net
<http://us.mc1844.mail.yahoo.com/mc/compose?to=fot@autox.team.net>
http://www.fot-racing.com <http://www.fot-racing.com/>
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/edwardbarnard@prodigy.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|