fot
[Top] [All Lists]

Re: [Fot] TR3 Inner wheel bearings

To: "'Todd Redmond'" <alfetta95@optonline.net>
Subject: Re: [Fot] TR3 Inner wheel bearings
From: "Steve Yott" <tr4@wi.rr.com>
Date: Tue, 16 Sep 2014 19:32:16 -0500
Cc: FOT@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <2268c4e1.859df.1487a41c9c3.Webtop.59@optonline.net> <6248d5e7.10f537.1487fac1ba7.Webtop.54@optonline.net>
Thread-index: AQGkePJmi8EpZfvTyB8dWqkwEXPuHwI5ilIVnElWu4A=
I can say for sure that both types of axles use the same inner bearing.  Do
you have one of the old bearings to measure the ID?  There is always an
outside chance of having a defective bearing.  I can send all the specs
tomorrow when I'm back in the shop if you like.

Steve Yott

-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of Todd Redmond
Sent: Tuesday, September 16, 2014 1:14 PM
To: alfetta95@optonline.net
Cc: FOT@autox.team.net
Subject: Re: [Fot] TR3 Inner wheel bearings

It was suggested that I possibly purchased the upgraded kit for the stub
axles because the bearings for the upgrade are a different part number than
stock and the stock won't fit. B I don't believe I did, but does anyone have
the new part number for the inner bearing? B  B My apologies to Ted at TSI,
I did not buy the bearing kit from him. It came from MOSS. B They say that
the bearings are the same ones on the upgrade as are on the stock stub. B
I'm getting mixed stories.


Thought about a BFH, but cooler minds prevailed.


Todd


On Mon, Sep 15, 2014 at 01:00 PM, Todd Redmond wrote:

> Friends,
>
>
> Building the front end of the TR3a and I'm having trouble putting the 
> inner wheel on the stub axle. B I've checked to make sure they weren't 
> going on cockeyed. B I've tried emery cloth and 400 sandpaper for what 
> I thought was a decent amount of time but still it won"t go on. B I've 
> emailed Ted at TSI because I purchased them from him, so I'm pretty 
> sure they are the right bearings. B Outer ones fit perfectly. B Is 
> there a little trick? B Do I continue to use the sandpaper?
>
>
> Thanks for the help.
> Todd
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/alfetta95@optonline.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>