fot
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Fot] Viton Rear Seal ?s

from [Rich] [Permanent Link][Original]
To: "fot@autox.team.net" <fot@autox.team.net> FILETIME=[6273CB60:01D00C2A]
Subject: [Fot] Viton Rear Seal ?s
From: Rich <rikrock@live.com>
Date: Sat, 29 Nov 2014 18:16:08 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net 
For those who have done this before, what clearance do you end up with between
the seal and the crank flange?

I'm getting around .020" which seems too little to me?

Thanks,

Rich Rock
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Fot] T-Day, John Hasty
Next by Date:  Re: [Fot] Viton Rear Seal ?s, Steve Yott
Previous by Thread:  [Fot] T-Day, John Hasty
Next by Thread:  Re: [Fot] Viton Rear Seal ?s, Steve Yott
Indexes:  [Date] [Thread] [Top] [All Lists]