fot
[Top] [All Lists]

[Healeys] Flasher relay advice please

Subject: [Healeys] Flasher relay advice please
From: dcorning at ford.com (Corning, Dan (D.C.))
Date: Sat, 25 Feb 2017 03:29:05 +0000
References: <001d01d28694$05999a00$10ccce00$@homecall.co.uk> <5DF89A96AFE9744A854AC9AD65E693CC70704C6C@mbx027-w1-ca-4.exch027.domain.local>
My flasher was having trouble and flashing too fast on one side.  I went to 
O'Rileys auto parts, bought a Novita EL12 flasher and swapped the guts into the 
Lucas can.  Took my time opening the cans, fit perfect, flashes just right 
regardless of loads and it's brighter.  (Had to tap the screw threads into the 
terminals)

[cid:image005.png at 01D28EE5.04BA2A10] [cid:image006.png at 01D28EE5.04BA2A10]

Best,
Dan Corning


From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Ed O'Neal
Sent: Tuesday, February 14, 2017 8:00 AM
To: Simon Lachlan; 'Healey List'
Cc: Pierre Henri Claret
Subject: Re: [Healeys] Flasher relay advice please

This is a recreation of the BT7 wiring diagram in ladder logic format (there's 
one for positive ground and one for negative).  The only difference is the 
reversing of the coil connections to maintain the same direction of current to 
the spark plugs.  It is not accurate for a BJ8, but is accurate with respect to 
the "8-way flasher box relay", so maybe it can help you sort out the problem.


Edward J. O'Neal, P.E., Pte.
Wadsworth O'Neal Associates, Inc.
6418 Commerce Park Drive
Fort Myers, Florida  33966
phone:  (239) 245-8728
cell:        (239) 410-6174


From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Simon 
Lachlan
Sent: Tuesday, February 14, 2017 2:29 AM
To: 'Healey List'
Cc: Pierre Henri Claret
Subject: [Healeys] Flasher relay advice please

BJ8 with combined side/indicators/brake lights. NOT the late phase II with the 
extra lights.
So,...the relay. By this I mean the round silver can with 1 wire from P to the 
dash, 1 from B to the 35 amp feed & 1 from L to T8 on the dreaded 8-way flasher 
relay box.
Now, the LHS indicators work and the RHS don't. Well, they've worked 
occasionally. My question is this:-
If one side works, then the relay works?? There's no way that the relay can 
function on one side only? It sends current down one wire only, so, if the LHS 
works, then the relay is doing its job????? Right?????

I remain very prepared to be confounded. My logic(?) usually fails when I'm in 
front of a wiring diagram. In fact, I would be thrilled just to be able to fix 
the problem with a cheap part.
Thanks,
Simon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170225/8b368822/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 381223 bytes
Desc: image005.png
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170225/8b368822/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.png
Type: image/png
Size: 363706 bytes
Desc: image006.png
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170225/8b368822/attachment-0001.png>

<Prev in Thread] Current Thread [Next in Thread>