fot
[Top] [All Lists]

Re: [Fot] GT6 Rear End Needed 3.89:1

To: Terry Sopher <terrysopher@gmail.com>
Subject: Re: [Fot] GT6 Rear End Needed 3.89:1
From: Chuck Gee via Fot <fot@autox.team.net>
Date: Fri, 21 Aug 2020 13:34:02 -0700
Cc: Friends of Triumph <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <6021A005-DB72-453A-8345-DF639CCDC37A@gmail.com>
Terry,

The 3.89 is common to the spitfire as well.  I believe it is the most common 
diff ratio.  Should be easy to find.  Iâ??d ship you one, but they are too 
heavy to ship.

Chuck

Sent from my iPhone

> On Aug 21, 2020, at 1:22 PM, Terry Sopher via Fot <fot@autox.team.net> wrote:
> 
> Correction - 3.89:1 is what I am in need of!
> 
> Thanks, Terry
> 
>> On Aug 21, 2020, at 15:51, Terry Sopher <terrysopher@gmail.com> wrote:
>> 
>> FOT - During qualifying for Kastner Cup my flywheel sheared off!  Thanks 
>> to Tim Slater for help diagnosing in the paddock!   Took the Spit to Andy 
>> Greene Sports and Vintage Race Cars in Savannah.  (Andy bought Ted Wentz's 
>> Savannah Race & Engineering in June 2020). Crank was broken as well.  
>> Rebuilding engine & hope to be a VDCA Hurricane in Savannah in Sep!
>> 
>> Hoping someone can help - Looking to source a 3.91 GT6 rear.  Apparently PO 
>> put a 4.55 in the car for hill climbs!
>> 
>> Thanks, 
>> COL(Ret) Terry Sopher
>> 813-508-1243
> _______________________________________________
> fot@autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/chasgee22@gmail.com
> 
> 
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/fot/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>