[Top] [All Lists]

Re: [Fot] TR3 front apron help

To: Greg Blake <>, Greg Blake via Fot <>
Subject: Re: [Fot] TR3 front apron help
From: DAVE HOGYE via Fot <>
Date: Tue, 25 Aug 2020 07:04:51 -0700 (PDT)
Importance: Normal
References: <>
Hi Greg,
There are a few good angled shots of the apron on my resto video.
Especially at 10:58.
Dave H.
> On 08/24/2020 6:32 PM Greg Blake via Fot <> wrote:
> Folks. Need some help with the shape of the lower section (below the grill 
> opening) of the front apron on a large mouth TR3. I cut up and welded new 
> metal on the front of the race car and Iâ??m pretty sure it is no where near 
> the stock profile. 
> My 14 year old son and I are rebuilding his 3 and it has obviously met a few 
> curbs in it day. The lower section is folded back and I donâ??t have a good 
> goby to make templates. 
> Can one of you fellow 3 care takers send us a to scale profile of that lower 
> section?  I think one for middle and one for each side just inside the bumper 
> plinths would get us close enough. Iâ??d really appreciate the help, so would 
> Will the owner. 
> Attached is a photo of Will working the rear corner that had 1/2â?? of bondo 
> when we stepped the car.  He is grinding off the remnants of the studs he 
> used to pull the dent  properly   
> Thanks. 
> Greg
> Sent from my iPhone_______________________________________________
> Donate:
> Archive:
> Unsubscribe/Manage: 


<Prev in Thread] Current Thread [Next in Thread>