healeys
[Top] [All Lists]

Re: AH 100-4 Throttle Return Spring

To: timothy bolish <wt3w@enter.net>
Subject: Re: AH 100-4 Throttle Return Spring
From: Dave & Marlene <rusd@velocitus.net>
Date: Tue, 15 Jun 2004 08:32:47 -0600
Hi Tim,

NOT that I know of.

One end goes at the connection of the vertical shaft to the throttle 
shafts, the other end goes down to a small hole in a tab washer on the 
heat shield/linkage pivot mount. This is the original connection & has a 
much more direct action on the throttles.

Dave Russell
BN2

timothy bolish wrote:
 > I know the one
> end goes on the horizontal shaft next to the bellcrank by the firewall but I
> have seen the other end go many places.
> Thanks,
> 
> Tim





<Prev in Thread] Current Thread [Next in Thread>