healeys
[Top] [All Lists]

Re: Side Curtain Rebuild possible?

To: "scott willis" <ahpowered@hotmail.com>, <healeys@Autox.Team.Net>
Subject: Re: Side Curtain Rebuild possible?
From: "Rich C" <richchrysler@quickclic.net>
Date: Sat, 18 Dec 2004 17:03:01 -0500
Scott,
This is a relatively simple job. New sidescreen rubber sets are readily 
available from the usual sources. There is a T shaped channel in the 
sidescreen frame corresponding with the T shape of the rubber. Angle one 
side of the T into the channel then with a silicone spray lubricant applied 
to the area, ease the remaining T edge into the slot using a fairly blunt 
edged tool such as a flat blade screwdriver or dulled putty knife. Be 
careful not to puncture through the rubber while pressing it into place. The 
silicone lube spray makes all the difference.
Rich Chrysler
----- Original Message ----- 
From: "scott willis" <ahpowered@hotmail.com>
To: <healeys@Autox.Team.Net>
Sent: Saturday, December 18, 2004 3:36 PM
Subject: Side Curtain Rebuild possible?


> Hi gang,
> Can the rubber on these old side curtains be re-installed? It looks 
> pressed in. Mine is rotten and much is missing.
>
> There a local glass shop that can replace the plexiglass.
>
> Any suggestions welcome.
>
> Cheers,
> Scott
> Mashed BN7 1960




<Prev in Thread] Current Thread [Next in Thread>