Oh my...get my wife to help? Not so easy there!
"Honey? What? I have the damn thing on there!"
No you don't. Move it to the left.
"I'm done. You do it."
I'll ask my neighbor's wife.
Cheers,
S
>From: Awgertoo@aol.com
>To: ahpowered@hotmail.com, healeys@autox.team.net
>Subject: Re: Tenax stud
>Date: Tue, 29 Mar 2005 13:22:32 EST
>
>In a message dated 3/29/2005 1:07:18 PM Eastern Standard Time,
>ahpowered@hotmail.com writes:
>I thought this job would be simple. WRONG! I cannot get to the nut on the
>back side of the stud. There is a little room to get in there but I can't
>get my hand in there. I am afraid to start pulling out the inner vinyl
>covered panels.
>
>Any suggestions on how I can get a nut on the back of the studs? I thought
>of taping a nut to a tool but...?
>Scott--
>
>I had a similar problem on my BN1 and found that with one person, perhaps
>with smaller hands working from the inside of the boot I got the job done.
>I
>believe we got the nut stareted on tenax stud and then my wife held it in
>place
>from the inside with a needlenose'd vicegrips while I tightened the stud
>from
>the outside. If this doesn't work I guess you could always fill, drill and
>tap
>the hole....
>
>Best--Michael Oritt, 100 Le Mans
_________________________________________________________________
Is your PC infected? Get a FREE online computer virus scan from McAfee.
Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
|