healeys
[Top] [All Lists]

Re: Help Find Please

To: richchrysler@quickclic.net, healeys@autox.team.net
Subject: Re: Help Find Please
From: N0040@aol.com
Date: Tue, 5 Apr 2005 22:23:39 EDT
Rich,
If you have access to secondary choke cabling, but without the sleeving,  
perhaps you can use standard electrical heat shrink tubing.
 
Would that be acceptable? or does the sleeved tube have to be factory  
provided.
 
Heat shrink tubing is available from any good electrical supply house. You  
would have to buy a "roll", so that you have the length. They also come in 
short  pieces in bags.
It's easily applied and shrunk with good heat gun.
 
Regards,
Bob - BJ8
Milford, MI
 

Listers,
I need to find some of the black sleeve tubes that house  the two secondary
choke cables out in the engine bay on a BJ8. Anybody have  a source for this
stuff?
Rich Chrysler

Your messages not reaching  the list?

***   unsubscribe/change address requests to majordomo@autox.team.net  or  try
***   http://www.team.net/mailman/listinfo
***  Archives at  http://www.team.net/archive
***  Edit your  replies!




<Prev in Thread] Current Thread [Next in Thread>