Mine are 5/16" BSF If you are trying to use SAE that may be your problem.
Bill Lawrence
On 6/27/05 6:18 AM, "Ben Prince" <blprince2@comcast.net> wrote:
> On the BN1, what size bolts (diameter and threads) hold the engine-mount to
> the block? These two bolts are on the bottom of each engine-mount assembly.
>
> Having just replaced the engine-mounts, I am having a most difficult time
> getting these bolts started. Perhaps I mixed up the bolts and I am trying to
> insert the wrong ones.
>
> Also, I'd appreciate any other advice on how to get the bolts started.
>
> Many thanks,
> Ben
|