healeys
[Top] [All Lists]

Re: Front Apron Panel

To: "Ned Smith" <smithn00@kitepilot.net>,
Subject: Re: Front Apron Panel
From: "Rich C" <richchrysler@quickclic.net>
Date: Sat, 24 Dec 2005 11:43:45 -0500
Hi Ned,

The apron as fitted to the six cylinder cars has four notches in the forward 
vertical flange of the apron. These are supposed to line up with the four 
mounting bolts going from brackets to bumper. They often do not and a bit of 
trimming of the notches may be required. The apron is sandwiched between the 
brackets and the bumper.

When the whole bumper/apron assembly is fitted to the car there should be a 
reasonably constant (though certainly not exact) space between the apron and 
the front shroud surface of about 5/8" to 3/4". (see picture att'd).

Rich Chrysler

----- Original Message ----- 
From: "Ned Smith" <smithn00@kitepilot.net>
To: "Austin-Healey List" <healeys@autox.team.net>
Sent: Saturday, December 24, 2005 9:09 AM
Subject: Front Apron Panel


> My BJ8 doesn't have a front apron. The Parts CD and Moss show the panel 
> but
> no fasteners. Is it mounted between the bumper and the bumper brackets?
>
>
>
> Merry Christmas
>
> Happy Hanukah
>
>
>
> Ned Smith
>
> BJ8

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
Convertible Detail 0008.jpg]




<Prev in Thread] Current Thread [Next in Thread>