healeys
[Top] [All Lists]

RE: carb heat shield

To: <KingR44916@aol.com>, <healeys@autox.team.net>
Subject: RE: carb heat shield
From: "Don " <don@anglesey.us>
Date: Tue, 28 Feb 2006 17:37:20 -0700
I ran mine without for about two weeks when I first installed the engine
after rebuild and had nothing but problems.  The carbs would act up as
soon as they got hot.  I would make every effort to get it to fit so
that the carbs are protected.
Don
57' BN4

-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net]
On Behalf Of KingR44916@aol.com
Sent: Tuesday, February 28, 2006 3:30 PM
To: healeys@autox.team.net
Subject: carb heat shield

installing a dw header and i can't get the heat shield to pass through
the  
steering column .do i need it on or should i cut it to somehow make it
fit  
,anyone have any sugestions thanks




<Prev in Thread] Current Thread [Next in Thread>