Perry:
As far as I know, the change to steel synchros was at the first BJ8. There
wer many other changes to the gearbox done at the same time - different
gearset, modified case, different layshaft, different top, etc. The later
BN / BT7 as well as the BJ7 all had the same gearbox (from the start of
centre-shift production).
Sorry, can't help you with the change point gearbox number - I suspect
that's going to be a toughie.
Cheers, Aloha,
Earl Kagna
Victoria, B.C.
BT7 tri-carb
BJ8
----- Original Message -----
From: <Healeyguy@aol.com>
To: <healeys@autox.team.net>
Sent: Saturday, March 11, 2006 12:15 PM
Subject: Re: Gearbox synchros
Good Day Listers
Trust all are having an interesting weekend.
Anybody know when the centershift gearboxes first had steel synchro rings
fit instead of brass? If so do you have the switch over gearbox number?
Thanks
Aloha
Perry
|