Dave: You may have the forwardmost lever facing down instead of up. I
did the same thing, but caught it before the car was on the road. See the
diagram in the shop manual, Figure 5 section E3. Its quite clear. None of
the clutch linkage should hang below the bottom of the frame rail.
Jim
----- Original Message -----
From: "Dave & M" <rusd@velocitus.net>
To: <SJNNOCK@aol.com>
Cc: <david@bighealey.ltd.uk>; <ManuelFS@emparque.pt>;
<healeys@autox.team.net>
Sent: Sunday, May 07, 2006 12:59 AM
Subject: Re: 100-4 Clutch linkage
> Hi Norman,
>
> I have had the same problem crossing speed bumps. Didn't smash the
> linkage but bent it enough to require adjustment. Do you have a solution
> for this problem? It seems as though the clutch linkage is the lowest
> point on the car. Even lower than the muffler. I have the "Cape" clutch
> linkage which is sturdy, but still hangs down.
>
> Regards,
> Dave Russell
> BN2
|