Patton/Ned and all,
If I had one without the "special" bolt I would probably make a sleeve for the
rack then use a chrome nut and bolt. DO NOT DRILL on your hinges!!!
Cheers!!
Tracy
---- Patton Dickson <57healey@gmail.com> wrote:
> Same issue here...
>
> On 6/8/06, Simon Lachlan <simon.lachlan@homecall.co.uk> wrote:
> >
> > Hi,
> > The "special stepped bolt"...where can I buy a pair? I've got one of these
> > racks. Fits well enough, does the job, but lacks the correct bolts.
> > Thanks,
> > Simon.
> >
> >
> > -----Original Message-----
> > From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net]
> > On
> > Behalf Of Tracy Drummond
> > Sent: 08 June 2006 14:02
> > To: 'Ned Smith'; 'Austin-Healey List'
> > Subject: RE: Luggage Rack
> >
> > Ned,
> >
> > First no need to drill out the holes on the hinges. There is a special
> > stepped bolt that is used in this application.
> >
> > The lower attachment pieces could be fabricated easily with two triangular
> > Pieces of stock and some threaded rod since that's really all that is.
> >
> > The legs should be shortened (about 4 1/2 inches) unless you want a
> > rearview
> > mirror full of luggage. It sits very high in it's stock configuration.
> >
> > I can send photos or post them on my website if folks are interested.
|