healeys
[Top] [All Lists]

Re: Clutch Modification

To: Bluechipracing <bluechipracing@snet.net>
Subject: Re: Clutch Modification
From: "Alan Seigrist Blue 100" <healey.nut@gmail.com>
Date: Tue, 7 Nov 2006 11:16:03 +0800
David -

To follow up on Jim's email -

You can use your existing Flywheel, it just needs to be re doweled from 2
pegs to three.  Most competant flywheel surfacing shops can do this.  The
bolt pattern on the clutch cover is the same.  the other option is just to
get a lightened flywheel from bill bolton already prepared.

Alan

On 11/7/06, Bluechipracing <bluechipracing@snet.net> wrote:
>
> David:   you will need the BJ8 flywheel, Pressure plate, clutch disc and
> throwout bearing.
>
>   For the centre shift gearbox, If the car is presently a side shifter
> you'll need to fit the centershift fibreglass transmission cover and
> corrosponding carpeting....Don't know what mods are necessary for these,
> but
> it is probably straightforward.  Other listers will have advice on this
> part.
>
> Jim
>
> ----- Original Message -----
> From: "D HALL" <dthall@btinternet.com>
> To: <healeys@autox.team.net>
> Sent: Monday, November 06, 2006 1:32 PM
> Subject: Clutch Modification
>
>
> > Good Evening
> >  I am contemplating converting my 10" clutch on my BT7 to a 9" as per
> BJ8. The intention is to mate thee engine with a centre shift gearbox.
> Does
> anyone on the list have an appreciation of the task involved, if so would
> they please pass any relevant comments how best to accomplish the
> modification. David
> >  BT7s MKI &MKII in boxes
> >
> >
> > David Hall




<Prev in Thread] Current Thread [Next in Thread>