healeys
[Top] [All Lists]

Re: oil filter

To: Brian Drab <brian_drab@infoserve.net>
Subject: Re: oil filter
From: Dave & M <rusd@sitestar.net>
Date: Sun, 06 May 2007 20:35:20 -0600
K&N HP-2009

Dave Rusell

Brian Drab wrote:
> I recently got hold of a Moss oil filter conversion kit for my BJ8.  This
> allows me to use a more easily available spin on oil filter rather than the
> original style filter.  The problem I now face is that with the
> instructions, it lists 2 types of filters to use. I have my choice of either
> a Wix or a K&N however  they list the filters with Moss numbers not the
> manufacturers numbers. The instructions specify that I should use a filter
> with a bypass valve and an anti-drain back valve. The anti-drain back valve,
> according to what Ive been able to read, is quite necessary due to the
> filter now being in a horizontal position which would cause it to drain
> after shut down and, therefore, take a lot longer to achieve full pressure
> on start up.
> 
> I'm sure lots of you use this type of filter arrangement. What I need to
> know are the correct filter numbers for the different brands (Fram,
> Purolater etc) and if anyone has any recommendations on brands.
> 
> Thanks.
> 
> Brian




<Prev in Thread] Current Thread [Next in Thread>