Jim--if you have a Pertronix or if you add one, that setting will be fairly
close to what you need---I believe.
tom
> [Original Message]
> From: bluechip <bluechipracing@snet.net>
> To: <healeys@autox.team.net>
> Date: 6/13/2007 11:46:48 AM
> Subject: NGK Spark Plugs
>
> Following the advice of several listers, I purchased some NGK BPR6EGP
plugs
> for my BN7. On the box are words "Do not adjust spark plug gap due to
> possible damage to fine center electrode" The gap measures .038". The
Healey
> shop manual specifies .024-.026. Now what do I do? Leave them gapped at
.038
> or very carefully adjust the gap to .025?
> I'm inclined to make the adjustment.
> Further advice from the experts would be greatly appreciated.
>
> Jim Smith
> East Hampton, CT
|