healeys
[Top] [All Lists]

Re: [Healeys] Aluminum oil pan/sump

To: "healeybn4@aol.com" <healeybn4@aol.com>
Subject: Re: [Healeys] Aluminum oil pan/sump
From: "Alan Seigrist" <healey.nut@gmail.com>
Date: Tue, 14 Aug 2007 13:33:23 +0800
At that pressure oil should be squirting out of the rocker when the engine
is running.  Take the rocker cover off and see if oil is squirting
everywhere.  If oil flow is normal, then I would have a look at your guage.

Your oil sump should have nothing to do with this, unless for some reason
the pan is binding on the pump?


On 8/14/07, healeybn4@aol.com <healeybn4@aol.com> wrote:
>
> I installed an aluminum oil pan/sump on my 100-6 which was sourced through
> Moss, but was from AH Spares.??I removed the 1/4 inch of the oil pipe as
> instructed and re-installed the oil screen on the bottom of the oil pump.?
> My oil pressure?skyrocketed to 100 psi at start up, and idles at 50 when
> warm, but goes up to over 100 with any acceleration.??I have removed and
> checked the pressure relief valve and everything seems fine.? I have checked
> with a different pressure gauge and everything still the same.??I have
> removed the pan and rechecked everything on the oil pump and found no
> blockage and re-installed with new gaskets, oil, and oil filter.? Nothing
> has improved.? The engine is running great, but I am very concerned with the
> pressure reading and have not driven the car.? Any ideas on what I should
> try next?? Has anyone else experienced a similar problem with aluminim oil
> pans??
>
> Help!!??
>
> Cheers,? Pete Sturtevant
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>