healeys
[Top] [All Lists]

Re: [Healeys] fuel guage

To: David Z <davzu29@cox.net>
Subject: Re: [Healeys] fuel guage
From: <pennell@cox.net>
Date: Thu, 23 Aug 2007 15:09:52 -0400
All,

I have tried more than once to adjust per the MGA instructions.  It has not yet 
resulted in satisfactory accuracy on the guage.  The best I have been able to 
do is adjust the guage in situ.  This gives a result similar to the "1/4 is 
empty" scenario.  If you try this be careful with your tool as there are hot 
posts nearby and you can short something out!

One word of note.  The very slightest difference in tightening the nut on the 
full side adjustment makes a BIG difference in the reading.  Needle changes by 
as much as 1/2 tank with the smallest of tightness changes.

Keith Pennell

> I would urge anyone who is thinking about adjusting their guage to think 
> about it a couple more times before you do anything. Althought the 
> adjustment directions appear correct, the ease of doing so is not. I can't 
> stress enough how sensitive this guage is, and how easy it is to break it. 
> You may decide it's better to live with the misadjusted guage, or if you try 
> to adjust it yourself, be prepared to pay for a rebuild.  Don't ask me how I 
> know......
> David Z. 
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>