There's no panhard rod on a BJ8, just radius arms...
On Dec 27, 2007 10:47 PM, WILLIAM B LAWRENCE <firstname.lastname@example.org> wrote:
> I have the same problem. I wonder if the panhard rod could be the culprit.
> When the left spring compresses the rod end swivels in an arc around the
> bracket on the right frame member. Maybe if it were a little longer...
> Bill Lawrence
> BN1 #554
> >From: Bob Spidell <email@example.com>
> >To: healeylist <firstname.lastname@example.org>
> >Subject: [Healeys] Rear End Alignment
> >Date: Thu, 27 Dec 2007 20:27:07 -0800
> >When I make a hard left turn, my right rear tire rubs against the bolts
> >securing the rebound bumper box (on the inside of the wheel well). I'm
> >running Vredestein Sprint Classic 185/70R15 tires--a bit oversized but
> >not outrageous. Anyway, it appears the rear axle is skewed towards the
> >driver's side.
> >I don't suppose there's any way to adjust the rear axle placement WRT
> >the chassis?
Support Team.Net http://www.team.net/donate.html