healeys
[Top] [All Lists]

Re: [Healeys] Shroud Welding

To: "Richard Pratt" <prattri@msn.com>
Subject: Re: [Healeys] Shroud Welding
From: tld6008@mchsi.com
Date: Thu, 07 Feb 2008 02:43:08 +0000
Tig weld it
--
Tim Davis BN7


----------------------  Original Message:  ---------------------
From:    "Richard Pratt" <prattri@msn.com>
To:      <healeys@autox.team.net>
Subject: [Healeys] Shroud Welding
Date:    Wed, 6 Feb 2008 23:49:34 +0000

> List,
> 
> I need to do some weld repair on the flanges of the front and rear shroud.
> The shroud material is 0.063" BS 1470NS3 which is similar to a current day
> material EN AW-3003 Aluminum Manganese. I was going to Mig with Argon using
> a 4043 wire. Does the list have any thoughts or recommendations for this
> work.
> 
> Richard
> 
> Cincinnati
> 
> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> You are subscribed as tld6008@mchsi.com
> 
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>