healeys
[Top] [All Lists]

Re: [Healeys] BJ8 firewall rubber plugs

To: "Freese, Ken" <Kendall.Freese@Aerojet.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] BJ8 firewall rubber plugs
From: "Rich C" <richchrysler@quickclic.net>
Date: Fri, 8 Feb 2008 14:57:47 -0500
Hi Ken,

I don't think there is any rhyme nor reason to the colours of the plugs. The 
red ones (actually sort of a red primer colour) seem to be used in behind 
the firewall throttle stand-off bracket and little red ones on the 
non-driver's side of the foot box to blank off where the gas pedal shaft and 
screws would go. Also big red ones to blank off the shut pillar holes on 
BJ7's and early Phase 1 BJ8's where the strikers used to fit on earlier 
models.
Beyond that most of them are usually black.

Of course, originals should always be saved if possible because new 
replacements are simply a sad and frustrating joke in almost all cases.

Rich Chrysler

----- Original Message ----- 
From: "Freese, Ken" <Kendall.Freese@Aerojet.com>
To: <healeys@autox.team.net>
Sent: Friday, February 08, 2008 10:46 AM
Subject: [Healeys] BJ8 firewall rubber plugs


>I wonder why there are both red and black rubber plugs on my BJ8
> firewall in the same size. Is there a code involved here? Did Jensen put
> in the red ones and Abingdon put in the black ones?
> Just curious.
> By the way, I could use a serviceable/new black 1 inch rubber plug, my
> red one is reuseable.
> Ken Freese
> BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive 
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>