healeys
[Top] [All Lists]

Re: [Healeys] shock towers

To: healeylist <healeys@autox.team.net>
Subject: Re: [Healeys] shock towers
From: Bob Spidell <bspidell@comcast.net>
Date: Sat, 07 Jun 2008 21:43:49 -0700
Please post replies to the List; I'll be doing this myself eventually.

TIA,
bs

James Shope wrote:
> checked the archives but no luck.  i am trying to determine the best way to
> remove the old shock tower plate on a bj7 which is kaputt.  it is on the
> driver side and i assume you have to remove the steering gear.   do you cold
> chisel or grind it off.  i am also assuming the new shock plates have the
> captive nuts welded in already.  we are going to have a mobile welding guy
> come by to weld the new plate.  what do i need to tell him about making sure
> everything is in the exact place and how critical it is, etc.,
> healeymanjim
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bspidell@comcast.net
>
> http://www.team.net/archive
>
>   


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>