healeys
[Top] [All Lists]

Re: [Healeys] Proper Thermostat for a BT7?

To: "Jack Feldman" <qualitas.jack@gmail.com>
Subject: Re: [Healeys] Proper Thermostat for a BT7?
From: David Nock <healeydoc@sbcglobal.net>
Date: Wed, 9 Jul 2008 16:39:22 -0700
Neither one of these it the correct one for a Healey. The Healey  
requires a sleeved thermostat and they are not available at any of  
your local parts houses. There needs to be a sleeve that closes off  
the water bypass in the head. The MGC has a bypass on the bottom that  
is closed off when the thermostat opens.



David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Jul 9, 2008, at 4:19 PM, Jack Feldman wrote:

> Somewhere I read that the 3000 takes a special thermostat. I asked a
> representative of a LBC repair shop and he confirmed the  
> information and
> gave me two part numbers. There were Stant 13358, and 13008. I went  
> to my
> local NAPA store and they translated those part numbers into NAPA  
> 169, and
> 170. Both of those thermostats looked exactly alike, and both were 180
> degree thermostats. The were so much alike I'm not even sure I got the
> correct part in the appropriate box.
>
> When I looked at them out of the box they just looked like any old
> thermostat.
>
> Do we really need a special thermostat? If the part numbers that  
> were given
> to me are correct, what is special about these thermostats?
>
> My MGC has a special thermostat, but the difference is obvious.
>
> Thanks,
>
> Jack
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>