healeys
[Top] [All Lists]

[Healeys] Steering spacer

To: Healeys@autox.team.net
Subject: [Healeys] Steering spacer
From: Chucknsueo@aol.com
Date: Sun, 13 Jul 2008 13:57:59 EDT
Does anybody have  a steering box mounting bracket spacer that they'd  be 
willing to part with?  It is BMC part 1B6195, Moss part 667-790.  I  know I can 
buy it new but wondered if somebody has a good used one that  they'd want to 
sell.  Please contact me off-list.
 
I removed the steering column from my BT7 tricarb with great  difficulty.  
The nuts came off of the bolts at the steering  box fine but the bolts would 
not 
come out.  I soaked them in PB  blaster, used a big hammer, air hammer, heat, 
etc but nothing worked.   After a couple of weeks of non-progress I finally 
got out the sawzall and cut  the bolts at both ends of the spacer bracket.  It 
turns out that the bolts  had corroded and essentially welded themselves into 
this bracket.  Even  with the bracket out I can't get the bolts out of it, and 
it is cracked and  missing a few pieces, not to mention being two sawzall 
kerfs shorter than  standard!  I didn't have this problem with my BJ8 steering. 
 
They came  right out and cleaned up nicely.  I'm not sure how common it is to 
have  these things seize up like this but it surprised the heck out of me!
 
Chuck Ott
Middletown, DE, USA
62BT7, 67BJ8, 69AN9



**************Get the scoop on last night's hottest shows and the live music 
scene in your area - Check out TourTracker.com!      
(http://www.tourtracker.com?NCID=aolmus00050000000112)
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Steering spacer, Chucknsueo <=