I asked Margaret at MOMA that question and she said that the chrome to glass
seal is not available and what they are using is a thin rubber extrusion that
comes on a bobbin like yarn. she puts about three wraps of the stuff into the
recess on the chrome ring, sandwiches it with the glass and clamps it onto the
instrument case. She gave me enough to do the gauges on my Land Rover and it
was a pretty simple fix.
Bill Lawrence
----------------------------------------
> From: grumpyinloomis@ssctv.net
> To: healeys@Autox.Team.Net
> Date: Thu, 11 Sep 2008 10:08:27 -0700
> Subject: [Healeys] gauge trim rubber
>
> What do you use to replace the rubber under the chrome trim, between the
trim
> and glass? Mine is very cracked!
>
> This is for the large gauges.
>
> Jerry
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as ynotink@msn.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|