Sure, stainless steel is a great choice. Many of the parts dist. are
selling SS screws for these areas. I suggest to start with the smallest
screw that will fit first, then if for some reason the
hole is too big then you can always move up to the next largest. And keep
in mind that once these screws are in place they won't be seen unless some
one digs for them.
Mark
----- Original Message -----
From: "Jim Lyons" <jlyons4@rochester.rr.com>
To: "Alan Seigrist" <healey.nut@gmail.com>
Cc: <healeys@autox.team.net>
Sent: Saturday, September 20, 2008 10:53 PM
Subject: Re: [Healeys] BJ8 Transmission Tunnel Mounting Screws and Nuts
> Hi Alen,
>
> Thanks.
>
> I see it now. I don't know how I missed that page ! What do you think
> about using stainless steel
> #8 Posidrive pan head sheetmetal screws. Any idea if any are available ?
>
> Jim
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|