Alan,
Roger Moment makes the rubber spindle seals. He may also be able to help
you with your problem.
"Roger Moment" <rmoment@comcast.net>
Cheers,
Curt
On Mon, Sep 22, 2008 at 12:43 AM, Alan Seigrist <healey.nut@gmail.com>wrote:
> All -
>
> My A90 has essentially the same wiper spindles as the BN1, and it is
> miserable!! Actually, these questions apply to my BN1 as well so here
> goes...
>
> 1) The spindles are round and smooth which makes it next to impossible for
> the wipers arms to hold on to them without eventually coming loose after
> just a couple of uses and sticking in some useless position on the
> windshield when being used in the rain. This is both very embarrassing to
> have wipers stuck in random positions on the windshield when it is raining,
> but also frustrating that the windshield isn't being wiped clear of rain
> drops! Has anyone come up with a good solution for making sure the wiper
> arms stick to the wiper spindles without coming loose? Any suggestions
> welcome. My cars are daily drivers and I do actually enjoy driving in the
> rain (shame on me!).
>
> 2) The spindles are supposed to have rubber seals on them. Does anyone
> make
> these? Maybe Scott's Old Rubber Co...?
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as cnaarndt@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|