G'day list. I've just been supplied by a local "specialist" with inner front
wheel bearings for my "new" BN1. These bearings are labelled "TR6 front O/D
(sleeve)" and are County Brand, made in India (itself a worry!) The bearing
although of the same dimensions as the old ones are not thrust type bearings,
ie with a lip on one side and marked "thrust", to be installed with this face
to the spacer presumably to carry the pre-load. The bearing supplied are
umarked and are the same both sides. Any comments?
Cheers
Peter Linn
Brisbane
BN1 Ward Spl
BN1 Holden V6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|