Thannks for all the replies on this topic.
Mal
----- Original Message -----
From: "Peter Caldwell" <peter@nosimport.com>
To: "Mal Bruce" <mbruce6@cogeco.ca>; <healeys@autox.team.net>
Sent: Friday, February 06, 2009 4:45 PM
Subject: Re: [Healeys] shock oil
> You're better off with a hydraulic oil as used for tractors and
> hydrostatic machines and hydraulic rams. Grade AWE68 (20W) It has
> antifoaming agents, etc. But engine oil will do in a pinch.... as
> will jack oil.
>
> Peter C
> =
> At 03:35 PM 2/6/2009, Mal Bruce wrote:
>>Gents,
>>My shop manual states that any good quality mineral oil in 20/20 weight is
>>fine to use. Does this mean any engine oil including synthetic would be
>>ok.
>>Thanks
>>
>>Mal
>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 02/06/09
11:31:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|