healeys
[Top] [All Lists]

Re: [Healeys] Voltage regulator issues BJ8

To: Weston Keyes <westonkeyes@hotmail.com>, Ahealey Ahealey
Subject: Re: [Healeys] Voltage regulator issues BJ8
From: Alan Seigrist <healey.nut@gmail.com>
Date: Tue, 31 Mar 2009 07:16:43 +0800
Wes -

It is quite common for new VRs to be completely out of adjustment.
Follow the VR adjustment procedure in the factory workshop manual, it
is very detailed - that should fix your problem.  The VR should be
cutting out by 17 volts!

Alan


On 3/31/09, Weston Keyes <westonkeyes@hotmail.com> wrote:
> Hello Folks,
>
>    More electrical woes.
>
> I have what looks like a brand new voltage regulator 22A.
> It appears to be working in that the ignition light goes out when the engine
> starts and is revved. The problem is that the longer of the two resistors on
> the back of the VR is getting very hot,in fact too hot to touch. I am using
> a
> digital volt meter so am getting a variety of voltage readings but the most
> I
> have seen is 17 volts coming off the generator. The battery is fully charged
> and is brand new. If I disconnect the wire from the VR to the field terminal
> on the  genny and instead run that too 12 volts I get the same readings on
> the
> output of the genny. Is my VR supplying too much voltage to the genny? I
> don't
> ming getting a new VR but don't want to just throw parts at the issue.
>
> Many thanks
>
> Wes Keyes
> York, Maine
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from my mobile device

Alan

'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>