healeys
[Top] [All Lists]

[Healeys] BJ 8 Clutch Question Follow Up

To: healeys@autox.team.net
Subject: [Healeys] BJ 8 Clutch Question Follow Up
From: STOCKLAND@aol.com
Date: Thu, 9 Apr 2009 12:08:04 EDT
I wrote earlier about replacing the flexible hose to the clutch slave  
cylinder and was having trouble getting to the bleed valve.  Options were  to 
remove the tranny cover or the slave cylinder.  Could not get to the top  bolt 
on the slave cylinder so before removing the cover, I found a short,  
angled, 7/16" ratchet wrench that I could barely slide over the bleed  screw.  
Only room for one click on the wrench but was able to turn the  screw enough 
to bleed the system.  Fortunately, the screw was not frozen in  place.  Hope 
this may help anyone else with the same problem.  Thanks  again for your 
suggestions.
 
Jon
**************Feeling the pinch at the grocery store?  Make dinner for $10 
or less. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] BJ 8 Clutch Question Follow Up, STOCKLAND <=