healeys
[Top] [All Lists]

Re: [Healeys] Brake Disc Stud Question

To: <healeys@autox.team.net>, "Mark LaPierre" <lapierrem@sbcglobal.net>
Subject: Re: [Healeys] Brake Disc Stud Question
From: "Dallas Congleton" <dcongleton@embarqmail.com>
Date: Sun, 12 Apr 2009 08:08:25 -0400
Try a 50/50 mix of acetone and ATF  :^)


----- Original Message ----- 
From: "Mark LaPierre" <lapierrem@sbcglobal.net>
To: <healeys@Autox.Team.Net>
Sent: Saturday, April 11, 2009 10:19 PM
Subject: [Healeys] Brake Disc Stud Question


>I have searched the list history to no avail cause I don't really know what
> the correct
> wording for these studs is or ares.
>
> So "brake disc to hub studs" is the best I can do for now.    On a  BT7
> 3000.
>
> I removed the old studs from my old front wire wheel hub/disc with know 
> real
> difficulty, but
> reinstalling them in the new wire wheel hub has been very interesting so 
> far.
> Hammering
> on brand new wire wheel hubs is not what I had in mind when I purchased 
> these.
> Why
> the studs aren't already installed in the hub in the first place is 
> another
> question for later.
>
> When I decided that hammering the studs into place was not working at all 
> I
> moved over
> to the vise to try to persuade them in with a little pressing action.   I
> really thought I was
> gaining some ground since the vise handle kept turning,  then suddenly my 
> vise
> decided to give it up.
> One of the forged metal halves literally broke in half.   Wow,  couldn't
> believe it.   That was
> a huge amount of force but the stud was not moving like I thought it was. 
> So
> , no more
> vise till the stores open on Monday.
>
> The studs are now in the freezer chillin, (contracting)  and the torch 
> comes
> out tomorrow to
> warm the holes up a tad (expansion) unless someone comes up with a better
> idea.
> I never  had this much trouble in the past on TRs that we had to do this 
> same
> operation on.
>
> At  $8.00 a piece for new studdly duddlies, x 10 =  $80.00.   Out of the
> question.
>
> The heat is the answer here,  right?
>
> Or,  I noticed (per Moss) that the late BJ8s used a regular bolt in this 
> area
> instead of the serrated studs.    .94 cents a piece.
> Would this be an acceptable mod in your humble opinions if I still can't 
> get
> the serrated studs in tomorrow?
>
> Mark
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>